Lbl-lighting 2-Circuit MO 4" Round Canopy User Manual download pdf

Installation Instructions for

700MOPCEN_

4” Single Flexible Power Feed Canopy

980MR2ASPFC

1.0

REMOTECNPY_-2C

Loosen (Do Not Remove) the 3 set screws on the strain

relief.

Before cutting the center power feed wires to the

desired length, move the wire identification tags (HOT1,

HOT2, and COM) down the wire.

Cut the end power feed wires to the desired length.

With a sharp knife cut 1" from the end of the wire web

and separate the wires 8" from each other.

Push the power feed wires through the strain relief

leaving at least 6” of cord in the back of the canopy for

wire connections.

Re-tighten the set screws.

Strip 1/2" off the wire ends.

Connect the center power feed wire marked "HOT1" to

electrical box marked "HOT1" with a wire nut.

Connect the center power feed wire marked "HOT2" to

electrical box wire marked "HOT2" with a wire nut.

Connect the power feed wire marked "COM" to electrical

box wire marked "COM" with a wire nut.

Note: If mounting the canopy onto an octagonal

electrical box, first mount the provided universal

mounting plate before proceeding to this step.

SET SCREW

STRAIN RELIEF

HOT 1

HOT 2

COM

Install the Canopy

NOTE: Low voltage wires must be present in

electrical box before proceeding with these steps.

Refer to the instructions provided with the remote

transformer.

NOTE: The Power Feed wires may be connected

directly to the transformer, Refer to the instructions

provided with the remote transformer for connection

details.

GENERAL PRODUCT INFORMATION:

This product is suitable for indoor dry locations only.

This product must be used with LBL Lighting 2-Circuit MonoRail

system only.

SPECIAL INSTALLATION

1 2

Summary of Contents

Page 1 - Install the Canopy

Installation Instructions for700MOPCEN_14” Single Flexible Power Feed Canopy980MR2ASPFC1.0REMOTECNPY_-2CLoosen (Do Not Remove) the 3 set screws on th

Page 2 - SAVE THESE INSTRUCTIONS!

2Properly place the all the wires and wire nut connections into the electrical box.Mount the canopy to the electrical box/mounting plate with two #8-3

Comments to this Manuals

No comments

Lbl-lighting 2-Circuit MO 4" Round Canopy User Manual

Browse online or download User Manual for Lighting Lbl-lighting 2-Circuit MO 4" Round Canopy. LBL Lighting 2-Circuit MO 4" Round Canopy User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Lbl-lighting 2-Circuit MO 4" Round Canopy