Lbl-lighting Bora W User Manual download pdf

Installation Instructions for

Bora

1.4

JWAP10_SC2D100

980BORAW

GENERAL PRODUCT INFORMATION:

This product can mount to either a 4" square electrical box with

round plaster ring or an octagon electrical box.

This product is suitable for damp locations.

This product can be dimmed with a standard incandescent dimmer.

Install the Fixture

Place all wires and wire nut connections properly inside the

electrical box.

Align the mounting plate holes with electrical box holes and

tighten with two #8-32 screws to secure the fixture in place.

MOUNTING

PLATE

ELECTRICAL

BOX HOLE

#8-32 SCREW

Feed the fixture wires through the mounting plate side hole.

In accordance with local electrical codes, make sure that the

mounting plate is grounded.

Connect the fixture white wire to the neutral power line wire

with a wire nut.

Connect the fixture black wire to the hot power line wire with

a wire nut.

CAUTION - RISK OF FIRE

This product must be installed in accordance with

the applicable installation code by a person familiar

with the construction and operation of the product

and the hazards involved.

Use minimum 90°c supply conductors.

Wall

6 6

1 2

1A1Installation Instructions forBora 1.4JWAP10_SC2D100980BORAWGENERAL PRODUCT INFORMATION:This product can mount to either a 4" square electrical

Install the Lamp and ShadePlace the glass shade onto the mounting plate. Align the glass shade holes with the mounting plate holes, replace and tigh

No comments

Lbl-lighting Bora W User Manual